about us

products

technical
contact us

 

 


 

STOP PRESS! Latest products from Powerform.

3 phase motor speed controls. Simple, cost effective, reliable - no frills no nonsense! 3, 6 and >6KW
Universal power controllers for resistive and inductive loads – lights, fans, motors, heaters – mix and match - whatever. Single and 3 phase from compact 500 VA to 20KW
Wall plate mounted compact controllers / dimmers that fit in standard wall boxes. Ideal for lights, fans or heaters. 1400 W and later in 2005 2000W!
Fan run-on and delayed off timers. Simple 6 minute activated by light switch, dual adjustable time, long delay and combo with speed control versions.

Please contact Peter at Powerform Controls in Sydney.
POWERFORM STANDARD FAN SPEED CONTROLLER RANGE
Click for more Detail Controller Model
Current Rating
amps
Features
MSC500A MSC500A
2 Inbuilt rotary switch potentiometer and auxiliary switched output. Bush mounted
MSC1200B MSC1200B
5 Basic manual controller, adjustable minimum speed, bush mounted
MSC1200B-WP MSC1200B-WP
5 MSC1200B controller mounted on a switch plate, including switch mechanism and knob
MSL1200B MSL1200B
5 Screw driver adjustable speed limiter normally used to reduce excess fan output or noise. May also be used to convert a single speed fan motor to two speeds. Flange mounted.
MSR2000A MSR2000A
8 - 10 Screw driver adjustable speed limiter normally used to reduce excess fan output or noise. Frequently used in concert with the RC-10 controller to provide remote, manual speed variation
RC-10 RC-10
NA Manual controller for use with the MSR2000A controller
RC-10-WP RC-10-WP
NA RC-10 controller mounted on a switch plate and fitted with a switch mechanism and knob. Used with MSR2000A
RC105B RC105B
5 Controller accepts an input of 1 - 10 volts or 4 - 20 milliamps to control fan motor speed. Commonly used in Building Management Systems.
RC108B RC108B
8 Controller accepts an input of 1 - 10 volts or 4 - 20 milliamps to control fan motor speed. Commonly used in Building Management Systems.
RC110B RC110B
10 Controller accepts an input of 1 - 10 volts or 4 - 20 milliamps to control fan motor speed. Commonly used in Building Management Systems.
Postal address: P.O.Box 17, Lindfield, NSW 2070, Australia
Street address: 33 Burraneer Ave, St Ives, Sydney, NSW 2075, Australia

Telephone: +61 2 9144 3973
Fax: +61 2 9144 3976

 

Email: sales@powerform.com.au
web by chisel
Copyright © 2005 Powerform Controls Australia