about us

products
technical
contact us

 
 
 
 
 
 

 
SOLID STATE FAN SPEED CONTROLLER


The MSL1200B controller provides a means of limiting the speed of a single phase PSC induction motor in a fan, blower or pump application. Optionally, the MSL1200B provides a convenient means of using a single speed motor in an application which requires operation at two speeds.

 
SPECIFICATIONS
RATING


240 volts, 5 amp, 50/60 Hz, 1200VA up to 30 degrees C in free air. Derate at 30VA per degree above 30 degrees C. Max. controller case temperature 70 degrees C.

 
SPEED SETTING


Screwdriver adjustment over a wide range of motor speeds.

 
MOUNTING


Inbuilt mounting plate permits attachment by screws to any suitable surface.

 
TERMINATION


Two 130mm leads, 24/020 250 volt V90 pvc.

 

ELECTROMAGNETIC COMPATIBILITY


This controller is fitted with an Electromagnetic Interference Suppression network and complies with the requirements of AS/NZS1044:1995 when correctly installed. See data sheet for installation requirements.

 
These diagrams indicate how the MSL1200B controller may be installed



Back to the Products page
Postal address: P.O.Box 17, Lindfield, NSW 2070, Australia
Street address: 33 Burraneer Ave, St Ives, Sydney, NSW 2075, Australia

Telephone: +61 2 9416 5666 From 1st Jan '05 +61 2 9144 3973
Fax: +61 2 9416 5999 From 1st Jan '05 +61 2 9144 3976

 
 
Copyright © 2005 Powerform Controls Australia